Control Valve Parts of a Control Valve Control Valve Positioner Control Valve Troubleshooting Control Valve Maintenance, Calibration and Stroke Checking Control Valve Designing and Sizing Control Valve – Interview Question and Answers
What is a Control Valve? The control valve regulates a flowing fluid, such as gas, steam, water or chemical compounds, to take into account the disturbance caused by the load and to keep the controlled process variable as close to the goal set point as is practically possible. Control Valve vs Mechanical valve Control Valve Requirement Basic Parts of Control Valves Control Valve Body Parts : https://automationforum.co/control-valve-body-materials/ Roles of Control Valve Flow Control Valve Pressure Control Valve Temperature Control Valve Level Control Valve Examples of control valve Actuator & Body in Control valve Function of …
Specification of a control valve begins with a control loop. The control loop in every industrial application includes transmitters to transmit the signal to the controller then to the positioner and finally to the actuator of the control valve. The valve assembly consists of : Positioner to convert electric signal to pneumatic signal. Actuator for …
How to specify control valves for process applications Read More »
Control valves in process industries are used to regulate various fluids and to control important process parameters like flow, level, temperature, pressure, and so on. The tips and rules of thumb that engineers used in selecting and sizing control valves are fuzzy, and applying alternative rules may lead to conflicting answers. Rules of thumb must …
Thumb Rules and Tips for control valves selection and sizing Read More »
What are the types of pressure control valves The major function of a pressure control valve is to protect the system from overpressure. This pressure could occur due to the decrease in fluid demand or it can also happen because of the surge which could cause during the opening and closing of the valve. These …
What are the types of pressure control valves and how does it work Read More »
Describe control valves Control valves are used to control the flow and direction of fluid such as gas, water, steam or chemical compounds. They are controlled so that the load disturbance can be compensated. Control valves are used in gas centrifugal compressors to avoid damages in the compression machine. Control valves are used in the …
Why do we need control valves Control valves are used to control the flow of the liquid, it can regulate the fluid flow when the position of valve plug or disk is changed from the force from actuator to do this the valve must not have fluid with external leakage and it also requires a …
Introduction Balancing is the term used when the resultant force on a plug is neutral. This means that the plug is neither forced up or down by the pressure of the flow stream. The advantage with balancing is that the actuator force required for controlled movement is greatly reduced. This allows for smaller and cheaper …
Introduction We have learned that valves are used to either shut-off flow, change the flow path or throttle flow, and that valves are characterized by how their flow coefficient varies with relation to closure member position, but valves are typed according to the motion of their closure member. The two types of control valves are …
Single Seated Single seated valves are one form of globe valve that are very common and quite simple in design. These valves have few internal parts. They are also smaller than double seated valves and provide good shut off capability. Maintenance is simplified due to easy access with top entry to the valve components. Because …
Difference between single seated & double seated control valves Read More »