The control valve is a device meant to control the flow rate or flow direction of the fluid in the process. It is referred to as the final control element. This control valve will adjust the flow passage as directed by a signal controller to modify or control the flow rate. The basic and most …
The control valve positioner is a field device that is used to increase or decrease the pressure of instrument air load driving the valve actuator of the control valve. Until the stem of the control valve travels and reaches the balanced position as directed by the process controller. Generally for the linear sliding stem control, …
What is choked flow? The choked flow is a compressible flow effect.The choked flow is the dynamic condition of the fluid that is associated with the venturi effect.The fluid velocity will increase when the fluid at a given parameter flows through the constriction called convergent and divergent nozzle in a pipe or line into a lower pressure environment. …
Actuator: An actuator is an electric, hydraulic, or pneumatic-powered device that supplies a force and motion for the opening or closing of a valve as the signal is received by the controller. An actuator is also used for the sequencing of valve operations. Control Valve: It is a valve that controls the rate of flow …
Control valves in process industries are used to regulate various fluids and to control important process parameters like flow, level, temperature, pressure, and so on. The tips and rules of thumb that engineers used in selecting and sizing control valves are fuzzy, and applying alternative rules may lead to conflicting answers. Rules of thumb must …
Thumb Rules and Tips for control valves selection and sizing Read More »
This valve switches an instrument air supply between the two outlet ports. The two-way valve can be either a normally opened valve (NO) or a normally closed valve (NC). These terms refer to their normal states without a power supply being applied. Solenoid-operated valves use an electrical coil to control the position of a poppet, …
What is the bench set of the control valve actuator? The bench set of a control valve is defined as the pressure range required for stroking the actuator valves to the rated valve travel from a fully closed 0% to a fully open 100% position with no valve forces present. The term bench set originates …
What is an emergency shutdown system? An emergency shutdown system is an automatic protection system that acts to shut down the part of the plant unit in case of occurrence of any potential dangerous state. In some countries, this is referred to as a safety instrumented system (SIS). An emergency shutdown system is a safety …
Implementing a Solenoid Operated Valve for Emergency Shutdown Read More »
What is a pneumatic valve Positioner? The pneumatic valve positioner is an instrument used for positioning the control valve stem in accordance with the pneumatic signal of 3-15 PSI received from a controller or from a manual loading station. A valve positioner is used to increase or decrease the air pressure to drive the actuator. The pneumatic …
Control valves are crucial components in every process industry. In process industries, these control valves are used for controlling the various types of fluids like water, gas, and steam in the process. As fluid passes through a control valve, the pressure systems across the control valve especially a pressure drop varies with fluid flow through …
